Southwest Medical

The EZ Reacher relieves the strain of bending, stretching or stooping to pick up items beyond reach. Lightweight aluminum jaws with flexible, non-slip gripping cups conform easily to the shape of any item. Jaws open to 3" (8.9 cm) wide.

Made of lightweight rustproof aluminum with an easy-to-squeeze trigger.

Bucket can be removed without lifting user or raising seat. Waterfall armrest & padded seat. 4" swivel wheels with 4 locking casters (forks). Unique design closes gap between bucket and seat to prevent unwanted slashing

Bucket, lid, & splash guard included.

Wet Chek Bedwetting Control Device has a Poly-foam vinyl pad that is 20" x 26" and an alarm box is 2" x 2.5". Includes a 66 inch electrical cord for entire unit and 9V battery for alarm box. Moisture-sensing bed pad attached to a miniaturized alarm box offers an effective way to stop bed wetting. Simply place pad underneath dry bed sheet with moisture sensor strips facing upward. Alarm will sound as moisture touches pad.

NiteTrain'r is a moisture-sensing device for children who wet. It consists of a small plastic alarm box that attaches to the shoulder area of the child's pajama or tee shirt close to the ear and a nonabsorbent sensor pad worn over the genitals and held in place (INSIDE the underwear) with a pair of snug-fitting shorts or panties. The plastic box unit contains a miniaturized electronics alarm and a 9-volt battery. NiteTrain'r has a built-in dual-volume control switch for the alarm (high/low). NOTE: Specify male or female when ordering.

Included with every alarm are instructions for use, a progress chart and two moisture-sensing pads. (Two male or two female) One 9V battery included. Additional sensors are available in our accessories section.

The large sensor pad worn inside the underwear can be uncomfortable for smaller children. Two sensor pads may not be adequate for children who wet multiple times a night, so you may want to purchase a spare.

HOW DOES IT WORK Place the moisture-sensitive pad into snug fitting underwear, with the wide area of the pad in front. the holes in the pad should be in contact with body, so they can detect and hold the signs of wetness.

ALARM: The alarm will sound when plugging it in, to let you it is working. At that time you can set the alarm to a high or low sound.